1.0

CUBASE LE Effects Parameters
34
Chopper
Chopper is a combined tremolo and autopan effect. It can use different
waveforms to modulate the level (tremolo) or left-right stereo position
(pan), either using tempo sync or manual modulation speed settings.
Parameters are as follows:
Parameter Description
Mix Sets the level balance between the dry signal and the effect. If Chopper
is used as a send effect, this should be set to maximum.
Tempo sync
on/off
The button above the Speed knob is used to switch tempo sync on
(blue button) or off (white button).
Speed If tempo sync is on, this is where you specify the base note value for
tempo-syncing the effect (1/1 - 1/32, straight, triplet or dotted). Note
that there is no note value modifier for this effect.
If tempo sync is off, the tremolo/auto-pan speed can be set freely with
the Speed knob, without sync to tempo.
Stereo/Mono
button
Determines whether the Chopper will work as an auto-panner (button
set to “Stereo”) or a tremolo effect (button set to “Mono”).
Waveform
buttons
Sets the modulation waveform.
Depth Sets the depth of the Chopper effect. This parameter can also be set by
clicking in the graphic display.