1.0

CUBASE LE Effects Parameters
32
Tranceformer
Tranceformer is a ring modulator effect, in which the incoming audio is
ring modulated by an internal, variable frequency oscillator, producing
new harmonics. A second oscillator can be used to modulate the fre-
quency of the first oscillator, synchronized to the Song tempo if you
wish.
The parameters are as follows:
• Note that clicking and dragging in the display allows you to adjust the
Tone and Depth parameters at the same time!
Parameter Description
Mix Sets the level balance between the dry signal and the effect.
Tone Sets the frequency (pitch) of the modulating oscillator (1 to 5000 Hz).
Tempo sync
on/off
The button above the Speed knob is used to switch tempo sync on or
off. The button is blue when tempo sync is on, and white when it is off.
Speed If tempo sync is on, this is where you specify the base note value for
tempo-syncing the effect (1/1 - 1/32, straight, triplet or dotted). Note
that there is no note value modifier for this effect. If tempo sync is off,
the modulation speed can be set freely with the Speed knob, without
sync to tempo.
On button Turns modulation of the Pitch parameter on or off.
Mono button Governs whether the effect output will be stereo or mono.
Depth Governs the depth of the pitch modulation.
Waveform
buttons
Sets the pitch modulation waveform.