1.0

Effects Parameters CUBASE LE
23
Metalizer
The Metalizer feeds the audio signal through a variable frequency fil-
ter, with tempo sync or time modulation and feedback control.
• Note that clicking and dragging in the display allows you to adjust the
Sharpness and Tone parameters at the same time!
Parameter Description
Mix Sets the level balance between the dry signal and the effect. If Metalizer
is used as a send effect, this should be set to maximum as you can con-
trol the dry/effect balance with the send.
Tempo sync
on/off
The button above the Speed knob is used to switch tempo sync on or
off. The button is blue when tempo sync is on, and white when it is off.
Speed If tempo sync is on, this is where you specify the base note value for
tempo-syncing the effect (1/1 - 1/32, straight, triplet or dotted). Note
that there is no note value modifier for this effect.
If tempo sync is off, the modulation speed can be set freely with the
Speed knob, without sync to tempo.
On button Turns filter modulation on and off. When turned off, the Metalizer will
work as a static filter.
Mono button Determines whether the output of the Metalizer will be in stereo or mono.
Sharpness Governs the character of the filter effect. The higher the value, the nar-
rower the affected frequency area, producing sharper sound and a more
pronounced effect.
Tone Governs the feedback frequency. The effect of this will be more notice-
able with high Feedback settings.
Feedback Sets the amount of feedback. Higher values produces a more “metallic”
sound.