1.0

CUBASE LE Effects Parameters
20
Chorus
The Chorus plug-in adds short delays to the signal, and pitch modu-
lates the delayed signals to produce a “doubling” effect. The parame-
ters are as follows:
• Note that clicking and dragging in the display allows you to adjust the
Frequency and Delay parameters at the same time!
Parameter Description
Mix Sets the level balance between the dry signal and the effect. If Chorus
is used as a send effect, this should be set to maximum as you can
control the dry/effect balance with the send.
Shapes This sets the modulation waveform. Triangle produces smooth modu-
lation, saw produces ramp shaped modulation and pulse waveform
produces stepped modulation.
Frequency This sets the modulation rate.
Delay This controls the depth of the Chorus effect.
Stages This adds one or two more delay taps, producing a thicker, multi-lay-
ered chorus effect.