8.0

Mackie MCU Pro
Basic Mixer Functions
9
Disabling the Fader Motors
Even though the faders are very quiet, there may be situations in which you want
absolute silence. In this case, you can disable the motors.
• To disable the fader motors, press the MOTORS button.
• To re-enable the fader motors, press the MOTORS button again. The faders
instantly move to reflect the current settings.
NOTE
If you disable the fader motors, the program automation is not affected. All
automation data that you have saved in your project is played back as usual.
V-Pot Encoders
Each channel in the channel set of Mackie MCU Pro has an encoder, the V-Pot.
Depending on the assigned function, you can rotate the V-Pots to navigate in the
settings or to edit the values of parameters. In some cases, the V-Pots also serve a
push-button function.
Switching Fader and V-Pot Functions
In some cases, you can edit a parameter more subtly with the faders than with the
stepped V-Pots. In this case, you can switch the functions of faders and V-Pots.
PROCEDURE
• To switch the functions of faders and V-Pots, press FLIP in the FADER
BANKS section.