8.0

JLCooper MCS-3000
Parameter Settings
65
Because the faders are motorized, they move to reflect any level automation that you
have created in your projects. The faders also move when you select a new set of
8 channels to control, to reflect the current levels of the 8 channels.
Channel Set Assignment
JLCooper MCS-3000 can remote-control 32 mixer channels in groups of 8
channels.
• To select the channels 1 to 8, press the BANK 1 button.
• To select the channels 9 to 16, press the BANK 2 button.
• To select the channels 17 to 24, press the BANK 3 button.
• To select the channels 25 to 32, press the BANK 4 button.
If you select a channel in your DAW, JLCooper MCS-3000 automatically switches
to the corresponding channel bank.
Channel Selection
You can select a single channel for detailed settings.
• To select a single channel, press the corresponding SELECT button in the
mixer section.
Muting and Soloing Channels
You can mute and solo channels with the corresponding MUTE and SOLO buttons
in the mixer section.
• To activate/deactivate the mute state for a single channel, press the
corresponding MUTE button.
• To activate/deactivate the solo state for a single channel, press the
corresponding SOLO button.
Enable Tracks for Recording
You can enable a single track or several tracks simultaneously for recording.
• To enable/disable a track for recording, press the corresponding AUX button
in the mixer section.
Parameter Settings
You can remote-control the left-right panning, the level of the sends, and the
equalizer settings with the rotate encoders in the system section of JLCooper
MCS-3000.
For all parameter settings, the following applies: