8.0

Mackie HUI
VST Parameter Settings
58
Insert Effects
You can control the insert effects for a selected channel. The following applies:
• To access the insert effect settings, press the F4 button.
•On Page 01, you can select an insert slot, activate/deactivate the selected
insert slot, and select an insert effect.
•On Page 02 and the following pages, you can set the insert effect
parameters.
• To bypass all insert effects for a selected channel, press the corresponding
INSERT button in the channel set section.
FX Channel Insert Effects
For all FX channels, Mackie HUI offers direct access to the settings of the plug-ins
in the INSERTS slot. The following applies:
• To access the FX channel insert effects, press the F5 button. The device
displays the FX channels as FX 1, FX 2, FX 3, and so on.
•On Page 01, you can select an FX channel insert slot, activate/deactivate the
selected insert slot, and select an insert effect.
•On Page 02 and the following pages, you can set the insert effect
parameters.
Master Insert Effects
You can control the master insert effects of the main output bus. The following
applies:
• To access the master insert settings, press the F6 button.
•On Page 01, you can select a master insert slot, activate/deactivate the
selected master insert slot, and select a master insert effect.
•On Page 02 and the following pages, you can set the master insert effect
parameters.
VST Instruments
You can control the parameters of the track and rack instruments that are loaded
into the VST Instruments slots of your DAW. You can also replace the track or rack
instruments with other instruments. You can access the instrument settings either
for a selected channel, or globally access all instruments that are loaded into the
VST Instruments window.
In global mode, the following applies:
• To access the VST instrument settings in global mode, press the F7 button.
•On Page 01, you can select a VST instrument slot, activate/deactivate the
selected VST instrument slot, and select a VST instrument.