8.0

Mackie HUI
Mixer Parameter Settings
55
• To activate/deactivate the mute state for a single channel, press the MUTE
button.
• To deactivate the mute state for all channels, press the ASSIGN button.
• To activate/deactivate the solo state for a single channel, press the SOLO
button.
• To deactivate the solo state for all channels, press the DEFAULT button.
A lit RUDE SOLO LIGHT LED to the right of the time code display indicates that
one or more channels are soloed.
Enable Tracks for Recording
You can enable a single track or several tracks simultaneously for recording.
• To enable/disable a track for recording, press the corresponding REC/RDY
button in the channel set section.
Monitoring Channels
You can monitor channels with the V-SEL button above the rotary encoders in the
channel set section.
• To activate/deactivate the monitoring of channels in the current channel set,
press the corresponding V-SEL button.
Automation
You can control the automation functions for the selected channel of your project
with the READ and WRITE buttons in the AUTO MODE section.
• To enable/disable the recording of automation data for the selected channel,
press the WRITE button.
• To enable/disable the reading of automation data for the selected channel,
press the READ button.
Mixer Parameter Settings
This section describes how to remote-control the settings for panning, sends, and
routing with Mackie HUI.
Panning
You can set the left-right and the front-rear panning of each channel in the current
fader set. The following applies:
• To access the panning settings, press the PAN button in the ASSIGN section.