8.0

53
Mackie HUI
This section describes how to set up Mackie HUI in your DAW application.
Setting Up Mackie HUI
You must add each new remote control device in the Device Setup dialog of
Cubase or Nuendo.
PROCEDURE
1. Connect Mackie HUI to your computer.
2. Turn on Mackie HUI.
3. Start Cubase or Nuendo.
4. Select Devices > Device Setup > Add Device.
5. In the Device Setup dialog, click + and select Mackie HUI.
6. Select the MIDI Input for Mackie HUI.
7. Select the MIDI Output for Mackie HUI.
8. Select MIDI Port Setup in the list on the left.
9. On the table on the right, locate the MIDI input to which you have connected
the remote device.
10. Deactivate the checkbox in the In ‘All MIDI Inputs’ column for that input.
This avoids accidentally recording the data from the remote control device when All
MIDI Inputs is selected as input for a MIDI track.
11. Click OK to close the Device Setup dialog.
Mixer Functions
This section describes how to work with the faders and with the SELECT, MUTE,
SOLO, REC/RDY, DEFAULT, and ASSIGN buttons, and how to assign and select
channels.