8.0

Mackie MCU Pro
Transport Control
47
Transport Wheel
The transport wheel below the main transport bar allows you to move the position
of the project cursor in your DAW. The wheel also provides a jog function, that
allows you to hear playback while moving the cursor position.
• To move the cursor position in the Project window, rotate the transport wheel
in the standard mode.
• To activate/deactivate the jog mode, press the SCRUB button to the right of
the Transport wheel. If the jog mode is activated, the LED above the SCRUB
button lights up.
Markers
You can use Mackie MCU Pro to move directly to particular positions defined in
your project with the aid of markers. Also, you can add a marker at the current
position in the project.
• To move from the project cursor position to the previous marker position in
your project, press the PREVIOUS button.
• To move from the project cursor position to the next marker position in your
project, press the NEXT button.
• To add a marker at the current project cursor position, press the ADD button.
Locators
You can set and move to locators with the LEFT and RIGHT buttons in the
TRANSPORT & CONTROL section.
• To set the left locator to the current project cursor position, hold down SHIFT
and press the LEFT button.
• To move the project cursor to the left locator, press the LEFT button.
• To set the right locator to the current project cursor position, hold down
SHIFT and press the RIGHT button.