8.0

Mackie MCU Pro

Quick Controls for VST Instruments and Tracks

Mackie MCU Pro allows you to control the quick controls for the current

instruments in the VST Instruments window. You can also control the Track Quick

Controls for the selected channel in the Inspector of the Project window.

• To access the quick controls, hold down SHIFT and press the MASTER

button. The LED above the MASTER button starts to blink.

Alternatively, you can hold down SHIFT and press the PLUG-INS button to

access the quick controls.

• To remote-control the quick controls of an instrument in the VST Instruments

rack with Mackie

MCU Pro, activate Set Remote-Control Focus for VST

Quick Controls in the lower right corner of the instrument section in the VST

Instruments window. To set the parameters of the current instrument quick

controls, use the corresponding V-Pots or press the FLIP button and use the

faders.

Example: Remote-Control Focus is activated for the HALion Sonic SE

•If Set Remote-Control Focus for VST Quick Controls is not activated for

any VST Instrument, you can control the Track Quick Controls for the

selected channel in the Inspector. To set the parameters in the Track Quick

Controls, use the corresponding V-Pots or press the FLIP button and use the

faders.