8.0

Mackie MCU Pro
VST Parameter Settings
44
Replacing and Removing VST Instruments
You can replace an instrument in the VST Instruments window with another
instrument or remove it completely in the global mode.
PROCEDURE
1. To access the VST instruments settings in global mode, hold down SHIFT
and press the INSTRUMENT button.
2. To move to Page 01, use the CHANNEL buttons.
3. To select a VST Instruments slot, rotate V-Pot1.
4. To load another instrument into the selected slot, rotate V-Pot 3.
If no instrument is loaded into the selected slot, the device display shows No VST
Instrument.
Activating/Deactivating VST Instruments
You can activate/deactivate the instruments in the VST Instruments window in the
global mode.
PROCEDURE
1. To access the VST instruments settings in global mode, hold down SHIFT
and press the INSTRUMENT button.
2. To move to Page 01, use the CHANNEL buttons.
3. To select a VST Instruments slot, rotate V-Pot 1.
4. To activate/deactivate the instrument in the selected slot, rotate V-Pot 2.
Editing VST Instrument Parameters
You can edit the parameters of the instruments in the VST Instruments window in
the global mode.
PROCEDURE
1. To access the VST instruments settings in global mode, hold down SHIFT
and press the INSTRUMENT button.
2. To move to Page 01, use the CHANNEL buttons.
3. To select a VST Instruments slot, rotate V-Pot1.
4. To move to the page which contains the parameter that you want to edit, use
the CHANNEL buttons.
5. To edit the parameter, rotate the corresponding V-Pot.