8.0

Mackie MCU Pro
VST Parameter Settings
42
• Name of the selected instrument
• Number of current page/Number of the available pages
Device display: VST Instrument settings in the selected channel mode – Page 01
On Page 02 and the following pages, the device display provides you with the
following information:
• Names or values of the available parameters
• Name of the selected instrument
• Number of current page/Number of the available pages
Device display: VST Instrument settings in the selected channel mode – Page 02
NOTE
Page 01 of the device display is used to navigate between the different instruments
and to activate/deactivate instruments. Therefore, Page 02 on the device display
correlates to Page 1 of the quick control pages of the particular instrument in the
VST Instruments window in your DAW. Page 03 on the device display correlates
to Page 2 in your DAW, and so on.
Activating/Deactivating VST Instruments
You can activate/deactivate the loaded VST instrument for the selected channel.
PROCEDURE
1. To access the VST instruments settings in selected channel mode, press the
INSTRUMENT button.
2. To move to Page 01, use the CHANNEL buttons.
3. To activate/deactivate the instrument in the selected rack slot, rotate V-Pot 2.
Setting VST Instrument Parameters
You can set the parameters of the loaded VST instrument for the selected channel.
PROCEDURE
1. To access the VST instruments settings in selected channel mode, press the
INSTRUMENT button.
2. To move to the page that contains the parameter that you want to set, use the
CHANNEL buttons.
3. To set the parameter, rotate the corresponding V-Pot.