8.0

Mackie MCU Pro
VST Parameter Settings
41
Setting Master Insert Effect Parameters
You can set the parameters of the master insert effects that are loaded in each of
the master insert slots.
PROCEDURE
1. To access the master insert effect settings, press the MASTER button.
2. To move to Page 01, use the CHANNEL buttons.
3. To select a master insert slot, rotate V-Pot 1.
4. To move to the page that contains the parameter that you want to set, use the
CHANNEL buttons.
5. To set the parameter, rotate the corresponding V-Pot.
VST Instruments
Mackie MCU Pro allows you to control the parameters of the track and rack
instruments that are loaded into the VST Instruments slots of your DAW. You can
also replace the track or rack instruments with other instruments.
You can access the instrument settings either for a selected channel, or directly
access all instruments that are loaded into the VST Instruments window.
Mackie MCU Pro also allows you to directly use the quick controls of each loaded
VST instrument.
RELATED LINKS
Quick Controls for VST Instruments and Tracks on page 45
VST Instrument Settings – Selected Channel
Selected channel mode allows you to control the settings of the loaded VST
instrument for the selected channel.
• To access the VST instrument settings for a selected channel, press the
INSTRUMENT button. The device switches to selected channel mode and
the LED above the INSTRUMENT button lights up.
On Page 01, the device display provides you with the following information:
• Name of the selected VST Instruments slot or of the selected channel
• On-Off state of the selected instrument