8.0

Mackie MCU Pro
VST Parameter Settings
36
• On-Off state of the selected effect
• Name of the selected effect
• Name of the selected channel
• Number of current page/Number of the available pages
Device display: Insert settings – Page 01 – Example
On Page 02 and the following pages, the device display provides you with the
following information:
• Names or values of the available parameters
• Name of the selected effect
• Name of the selected channel
• Number of current page/Number of the available pages
Device display: Insert settings – Page 02 – Example
NOTE
For FX Channels, Mackie MCU Pro also offers direct access to the settings of the
plug-ins in the first Inserts slot.
RELATED LINKS
FX Channel Insert Effects on page 37
Loading Insert Effects
You can load insert effects into the insert slots of the selected channel.
PROCEDURE
1. To access the insert settings, press the PLUG-INS button.
2. To move to Page 01, use the CHANNEL buttons.
3. To select an insert slot, rotate V-Pot 1.
4. To load an insert effect into this slot, rotate V-Pot 3.
RESULT
The insert effect is loaded and active.
NOTE
To remove any effect from an insert slot, move to step 4, rotate V-Pot 3 and select
No Effect.