8.0

Mackie MCU Pro
VST Parameter Settings
35
Activating/Deactivating Channel Strip Modules
You can activate/deactivate the modules in the channel strip categories.
PROCEDURE
1. To access the channel strip module settings, press the DYN/FX/AUX button.
2. To move to Page 01, use the CHANNEL buttons.
3. To select a channel strip category, rotate V-Pot 1.
4. To activate/deactivate a module, rotate V-Pot 2.
Setting Channel Strip Module Parameters
You can set the parameters of the currently loaded module in a channel strip
category.
PROCEDURE
1. To access the channel strip module settings, press the DYN/FX/AUX button.
2. To move to Page 01, use the CHANNEL buttons.
3. To select a channel strip category, rotate V-Pot 1.
4. To load a module, rotate V-Pot 3.
5. To move to Page 02, use the CHANNEL buttons.
6. To set the module parameters, rotate the corresponding V-Pot.
Insert Effects
Mackie MCU Pro allows you to control the insert effects of the selected channel.
• To access the channel insert effects, press the PLUG-INS button in the
ASSIGNEMNT section. The device displays the insert effects of the selected
channel as IFX 1, IFX 2, IFX 3, and so on.
On Page 01, the device display provides you with the following information:
• Name of the selected insert effect slot