8.0

Mackie MCU Pro
VST Parameter Settings
34
For detailed information about the channel strip modules refer to the “Operation
Manual” of your DAW.
To access, the channel strip module settings, press the DYN/FX/AUX button in the
ASSIGNMENT section.
On Page 01, the device display provides you with the following information:
• Name of the selected channel strip category
• On-Off state of the selected module
• On-Off state of side-chain
• Name of the selected module
• Name of the selected channel
• Number of current page/Number of the available pages
Device display: Channel strip settings – Page 01 – Example
On Page 02 and the following pages, the device display provides you with the
following information:
• Names or values of the available module parameters
• Name of the selected module
• Name of the selected channel
• Number of current page/Number of the available pages
Device display: Channel strip settings – Page 02 – Example
Loading Channel Strip Modules
You can load modules into the channel strip categories.
PROCEDURE
1. To access the channel strip module settings, press the DYN/FX/AUX button.
2. To move to Page 01, use the CHANNEL buttons.
3. To select a channel strip category, rotate V-Pot 1.
4. To load a module, rotate V-Pot 3.
If no module is loaded, the device displays Not Loaded.