8.0

Mackie MCU Pro

VST Parameter Settings

Setting Frequency, Gain, and Q-Factor on One Page

You can set the frequency, the gain, and the Q-factor of the equalizer bands and

activate/deactivate a band for the selected channel on one page. To set the

frequency and the gain, rotate the corresponding V-Pot. To set the Q-factor and

activate/deactivate a band, press and then rotate the corresponding V-Pot.

PROCEDURE

1. To access the equalizer settings, press the EQ button.

2. To set the frequency and the gain for an equalizer band, rotate the

corresponding V-Pot.

3. To set the Q-factor and activate/deactivate an equalizer band, press and then

rotate the corresponding V-Pot.

Setting Frequency, Gain, and Q-Factor on Two Pages

You can set the frequency, the gain, and the Q-factor of the equalizer bands and

activate/deactivate a band for the selected channel separated on two pages. You

can set the frequency and the gain on Page 01. You can set the Q-factor and

activate/deactivate a band on Page 02.

PROCEDURE

1. To access the equalizer settings, hold down SHIFT and press the EQ button.

2. To move to Page 01, use the CHANNEL buttons.

3. To set the frequency and the gain for an equalizer band, rotate the

corresponding V-Pots.

4. To move to Page 02, use the CHANNEL buttons.

5. To set the Q-factor for an equalizer band and to activate/deactivate a band,

rotate the corresponding V-Pots.

Channel Strip Modules

For audio channels, Mackie MCU Pro offers direct access to the channel strip rack.

Here, you can load channel strip modules and edit the module parameters for the

selected channel.

You can remote-control the settings of the following channel strip categories:

•Gate

• Compressor

• Tools

• Saturation

•Limiter