8.0

Mackie MCU Pro
Mixer Parameter Settings
30
• To access the direct routing settings, hold down SHIFT and press the FIRST
button in the ASSIGNMENT section.
The device display provides you with the following information:
• Names of the channels in the current channel set
• Name or On/Off states of the selected direct routing slot
• Number of current page/Number of the available pages
Device display: Direct Routing settings – Page 01 – Direct Routing slot 1
Device display: Direct Routing settings – Page 09 – Summing mode
Setting Direct Routing Settings (Nuendo only)
You can activate/deactivate the direct routing slots on Page 01 to Page 08. You
can activate/deactivate the direct routing summing mode on Page 09.
PROCEDURE
1. To access the direct routing settings, hold down SHIFT and press the FIRST
button.
The LED left of the FIRST button starts to blink.
2. To assign a channel to the channel strips, use the BANK buttons.
3. To move to the direct routing slot that you want to set, use the CHANNEL
buttons.
4. To activate/deactivate a direct routing slot or the direct routing summing
mode, rotate the corresponding V-Pot.