8.0

Mackie MCU Pro
Mixer Parameter Settings
26
Switching Cue Sends between Pre-Fader and Post-Fader
You can activate Pre to set a cue send to Pre-Fader in the cue send settings. If Pre
is deactivated, the cue send is set to Post-Fader.
PROCEDURE
1. To access the cue send settings, hold down SHIFT and press the SENDS the
button.
2. To select one of the cue sends, hold down SHIFT and keep pressing the
SENDS button until you have reached the cue send slot that you want to set.
3. To move to Page 03, use the CHANNEL buttons.
4. To activate/deactivate Pre for the selected cue send for a channel, rotate the
corresponding V-Pot.
Setting the Cue Send Panning
You can set the panning of the cue sends for the channels that are currently
assigned to the channel set.
PROCEDURE
1. To access the cue send settings, hold down SHIFT and press the SENDS
button.
2. To select one of the cue sends, hold down SHIFT and keep pressing the
SENDS button until you have reached the cue send slot that you want to set.
3. To move to Page 04, use the CHANNEL buttons.
4. To set the panning of a selected cue send for a channel, rotate the
corresponding V-Pot.
Activating/Deactivating All Cue Sends
You can simultaneously activate/deactivate all sends for the channels that are
currently assigned to the channel set.
PROCEDURE
1. To access the cue send settings, hold down SHIFT and press the SENDS
button.
2. To move to Page 05, use the CHANNEL buttons.
3. To activate/deactivate all cue sends for a channel, rotate the corresponding
V-Pot.