8.0

Mackie MCU Pro

Mixer Parameter Settings

Activating/Deactivating All Sends

You can simultaneously activate/deactivate all sends for the channels that are

currently assigned to the channel set.

PROCEDURE

1. To access the send settings in global mode, hold down SHIFT and press

LAST.

2. To move to Page 06, use the CHANNEL buttons.

3. To activate/deactivate all sends for a channel, rotate the corresponding V-Pot.

Cue Sends

Mackie MCU Pro allows you to control the settings of the cue sends that you have

created in your project.

Cue Send Settings

You can edit the settings of the cue sends for the channels that are currently

assigned to the channel set.

For each cue send, you can edit the level and the panning, and switch between

pre-fader and post-fader. You can also activate/deactivate individual cue sends or

activate/deactivate all cue sends simultaneously.

• To access the cue send settings for the current channel set, hold down

SHIFT and press the SENDS button. The device displays the cue sends as

Studio 1, FX Studio 2, FX Studio 3, and so on.

The device display provides you with the following information:

• Names of the channels in the current channel set

• Name or value of the selected parameter

• Name of the selected cue send

• Number of current page/Number of the available pages

Device display: Cue send settings – Page 01 – Level