8.0

Mackie MCU Pro
Mixer Parameter Settings
23
Switching between Pre-Fader and Post-Fader
You can activate Pre to set a send to pre-fader. If Pre is deactivated, the send is
set to Post-Fader.
PROCEDURE
1. To access the send settings in global mode, hold down SHIFT and press
LAST.
2. To select one of the sends FX Send 1 to FX Send 8, hold down SHIFT and
keep pressing the LAST button until you have reached the send slot that you
want to set.
3. To move to Page 03, use the CHANNEL buttons.
4. To activate/deactivate Pre for the selected send for a channel, rotate the
corresponding V-Pot.
Setting the Send Panning
You can set the panning of the Sends for the channels that are currently assigned
to the channel set.
PROCEDURE
1. To access the send settings in global mode, hold down SHIFT and press
LAST.
2. To select one of the sends FX Send 1 to FX Send 8, hold down SHIFT and
keep pressing the LAST button until you have reached the send slot that you
want to set.
3. To move to Page 04, use the CHANNEL buttons.
4. To set the panning of a selected send for a channel, rotate the corresponding
V-Pot.
Selecting Output Busses
You can select the bus destination of the sends for the channels that are have
currently assigned to the channel set.
PROCEDURE
1. To access the send settings in global mode, hold down SHIFT and press
LAST.
2. To select one of the sends FX Send 1 to FX Send 8, hold down SHIFT and
keep pressing the LAST button until you have reached the send slot that you
want to set.
3. To move to Page 05, use the CHANNEL buttons.
4. To select the bus destination of the selected send for a channel, rotate the
corresponding V-Pot.