8.0

Mackie MCU Pro
Mixer Parameter Settings
22
Device display: Send settings in global mode – Page 05 – Bus destination
Device display: Send settings in global mode - Page 06 – Activate/Deactivate all sends
Setting Send Levels
You can set the level of the sends for the channels that are currently assigned to the
channel set.
PROCEDURE
1. To access the send settings in global mode, hold down SHIFT and press the
LAST button.
2. To select one of the sends FX Send 1 to FX Send 8, hold down SHIFT and
keep pressing the LAST button until you have reached the send slot that you
want to set.
3. To move to Page 01, use the CHANNEL buttons.
4. To set the level of a selected send for a channel, rotate the corresponding
V-Pot.
Activating/Deactivating Single Sends
You can activate/deactivate individual sends for the channels that are currently
assigned to the channel set.
PROCEDURE
1. To access the send settings in global mode, hold down SHIFT and press
LAST.
2. To select one of the sends FX Send 1 to FX Send 8, hold down SHIFT and
keep pressing the LAST button until you have reached the send slot that you
want to set.
3. To move to Page 02, use the CHANNEL buttons.
4. To activate/deactivate the selected send for a channel, rotate the
corresponding V-Pot.