8.0

Mackie MCU Pro
Mixer Parameter Settings
20
Setting Send Levels
You can set the level of the sends for the selected channel.
PROCEDURE
1. To access the send settings in selected channel mode, press the LAST
button.
2. To move to Page 01, use the CHANNEL buttons.
3. To set the level of a send, rotate the corresponding V-Pot.
Activating/Deactivating Sends
You can activate/deactivate the sends for the selected channel.
PROCEDURE
1. To access the send settings in selected channel mode, press the LAST
button.
2. To move to Page 02, use the CHANNEL buttons.
3. To activate/deactivate a send, rotate the corresponding V-Pot.
Switching between Pre-Fader and Post-Fader
You can activate Pre to set a send to pre-fader. If Pre is deactivated, the send is
set to post-fader.
PROCEDURE
1. To access the send settings in selected channel mode, press the LAST
button.
2. To move to Page 03, use the CHANNEL buttons.
3. To activate/deactivate PRE for a send, rotate the corresponding V-Pot.
Selecting Output Busses
You can select the bus destination of the sends for the selected channel.
PROCEDURE
1. To access the send settings in selected channel mode, press the LAST
button.
2. To move to Page 04, use the CHANNEL buttons.
3. To select the bus destination for a send, rotate the corresponding V-Pot.