8.0

Mackie MCU Pro
Mixer Parameter Settings
16
To directly move to the first or last available parameter page, hold down
SHIFT and press the left or right CHANNEL button.
3) To edit a single parameter, turn the corresponding V-Pot.
When you edit a parameter, the display shows this value for a few seconds.
• To permanently display all parameter values, press the NAME/VALUE button.
NOTE
In some cases, you can edit a parameter more subtly with a fader than with a V-Pot.
In this case, press the FLIP button to switch the functions of faders and V-Pots.
RELATED LINKS
Switching Fader and V-Pot Functions on page 9
Panning
You can set the left-right and the front-rear panning of each channel in the current
fader set. You can also set the additional surround panning parameters for a
selected channel.