8.0

Mackie MCU Pro
Basic Mixer Functions
13
Soloing Channels
You can solo channels with corresponding SOLO buttons in the channel set
section.
• To solo a channel, press the SOLO button of the corresponding channel in
the channel set section. You can solo several channels at a time.
A lit SOLO button indicates that a channel is soloed.
A lit RUDE SOLO LED at the top right of Mackie MCU Pro always indicates
that one or more channels are soloed.
NOTE
If you solo a channel and then select another set of channels for fader control,
the SOLO button is no longer dark, although the channel is still soloed.
• To deactivate the solo state for a single channel, press the corresponding
SOLO button again.
• To deactivate the solo states for all channels simultaneously, press SOLO
DEFEAT.
Listen Mode
You can activate/deactivate the Listen mode for each channel with the
corresponding SOLO button in the channel set section.
• To use the SOLO buttons as Listen buttons, hold down SHIFT and press the
PROJECT button. The LED above the PROJECT button lights up.
• To activate/deactivate the Listen mode for a channel of the current channel
set, press the corresponding SOLO button.
NOTE
If you set one or more channels in Listen state, Enable Listen for Output in
the Control Room is not activated automatically. You must activate Enable
Listen for Output separately.
• To deactivate the Listen states for all channels, hold down SHIFT and press
MIXER.