8.0

Mackie MCU Pro
Basic Mixer Functions
12
Monitoring Channels
If Mackie MCU Pro works in standard panning mode, you can use the push function
of the V-Pots to activate/deactivate the monitoring of channels that are currently
assigned to the channel set.
PROCEDURE
1. To activate the standard panning mode, press the PAN button in the
ASSIGNMENT section.
2. To activate/deactivate the monitoring of channels in the current channel set,
press the corresponding V-Pot.
Muting Channels
You can mute channels with the corresponding MUTE buttons in the channel set
section.
• To mute a channel, press the MUTE button of the corresponding channel in
the channel set section. You can mute several channels at a time.
A lit MUTE button indicates that a channel is muted.
• To deactivate the mute state for a single channel, press the corresponding
MUTE button again.
• To deactivate the mute states for all channels simultaneously, hold down
SHIFT and press the SOLO DEFEAT button.
NOTE
If you mute a channel and then select another set of channels for fader control,
the MUTE button is no longer lit, although the channel is still muted.