8.0

Mackie MCU Pro
Basic Mixer Functions
11
Instrument channels: Hold down SHIFT and press button 5.
MIDI channels: Hold down SHIFT and press button 6.
I/O busses: Hold down SHIFT and press button 7.
Channel Selection
You can select a single channel for detailed settings.
• To select a single channel, press the SELECT button in the channel set
section.
A lit SELECT button indicates that a channel is selected.
NOTE
If you select a channel and then select another set of channels for fader
control, the SELECT button turns dark, although the channel is still selected.
Enable Tracks for Recording
You can enable a single track or several tracks simultaneously for recording with the
REC buttons in the channel set section.
• To enable/disable a track for recording, press the REC button in the channel
set section.
A lit REC button indicates that a particular track is ready for recording.
The SIGNAL LEDs underneath the REC buttons indicate signal activity on the
channels. The SIGNAL LED lights up as soon as the level meter for a channel shows
any activity.