8.0

Mackie MCU Pro
Basic Mixer Functions
10
Channel Set Assignment
The channel set section of Mackie MCU Pro controls different channels in your
application, plus the master level that has its own fader. You can assign channels
to the channel set with the BANK buttons in the FADER BANKS section.
• To switch from one set of channels to the next, press the left or right BANK
button. The BANK buttons always shift channels in groups of 8, unless the
last channels do not make a complete group of 8.
For example, if your project has 20 channels, and you are currently controlling
the channels 1 to 8, press the right BANK button to move to the channels 9
to 16. If you press the right BANK button again, you move to the channels 13
to 20. If you then press the left BANK button, you move back to the channels
5 to 12.
• To shift the channel set assignment in steps of 1 channel, hold down SHIFT
and press the left or right BANK button.
For example, if your are currently controlling the channels 9 to 16, hold down
SHIFT and press the left BANK button to control channels 8 to 15 instead.
Applying Channel Visibility Presets and Channel Types
If you have created individual Channel Visibility Configurations in your
MixConsole, you can apply these presets to the channel set. You can also directly
assign particular channel types to the channel set.
• To apply one of the first 8 individual Channel Visibility Configurations to the
channel set, press the corresponding button 1 to 8 in the right FADER
BANKS section. This setting is also reflected in the MixConsole.
• To apply a particular channel type directly to the channel set, hold down
SHIFT and press the corresponding button 1 to 8 in the right FADER BANKS
section. This setting is not reflected in the MixConsole. The following button
combinations apply:
All channels: Hold down SHIFT and press button 1or button 8.
Audio channels: Hold down SHIFT and press button 2.
Groups: Hold down SHIFT and press button 3.
FX channels: Hold down SHIFT and press button 4.