6.0

52 — Mixing and effects
3. Experiment with the reverb settings until you get the room ambience that
you want.
The effect parameters are described in detail in the PDF document “Plug-In Reference”.
4. Open the Mixer and click the “Edit Audio Channels Settings” button of one
of your audio tracks.
The VST Audio Channel Settings dialog opens.
5. In the Sends section, click on the first effect slot and choose “FX1-Room-
Works SE” from the pop-up menu.
The FX channel is loaded into the send effect slot.
6. Click the On/Off button above the effect slot to activate the send.
7. Move the slider to the right to raise the level of the send to the “Room-
Works SE” effect. You will notice the ambience created by the reverb effect.
Ö By soloing the track you will be able to hear this effect more clearly.
8. Repeat the previous four steps for any channels to which you want to apply
the reverb effect.
The great thing about FX channels is that they look and feel just like regular
audio channels. If you set an EQ for an FX channel, only the effect will be
changed by the EQ.