6.0

48 — Mixing and effects
The VST Audio Channel Settings window opens, where you can make your EQ
settings. There are four EQ bands on each track.
5. In the Equalizers section, activate the EQs by clicking the corresponding
“EQ Band Active” buttons.
You can also click in the EQ curve area to turn on an EQ.
6. Click and move the EQ point in the display.
• Set up the gain by moving the EQ point up or down.
The gain makes that particular EQ louder or softer.
• Set up the frequency by moving the EQ point right or left.
Ö If you hold down [Ctrl]/[Command], you can restrict the movement of the
EQ to vertical adjustment. If you hold down [Alt]/[Option], you can restrict the
movement of the EQ to horizontal adjustment.
• Change the quality (Q) of the EQ by holding down [Shift] and moving the EQ
curve up or down.
• You can bypass the EQs by clicking on the “Bypass Equalizers” button.