6.0

Recording audio — 35
Recording
To record the instrument you are playing (in our example a bass guitar), pro-
ceed as follows:
1. Position the cursor at the beginning of the project.
This will make sure you start recording on bar 1.
2. Click the Record button to start recording.
Since the “Precount/Click” button is activated, you will hear two bars of click before recording
begins.
3. Click Stop when you are finished.
4. Turn off the Monitor and “Record Enable” buttons on the track.
By turning off the “Record Enable” button you make sure that you do not accidentally record on the
track again.
Congratulations! You have just recorded your first piece of audio in Cubase.
Move ahead to the next section to learn how to play back audio.