6.0

32 — Recording audio
3. Click the Tempo button so that the text field to the right reads “Fixed”
(instead of “Track”), then click in the value field and enter a new tempo value.
The tempo is set in bpm (beats per minute).
Setting levels
For this example, we assume that you have an instrument playing through an
amplifier with a microphone in front of the amplifier’s speaker. This microphone
is plugged directly into the audio device’s input. The level has to be set so that
there is enough volume without clipping. Proceed as follows:
1. Make sure that the “Record Enable” button on the track is enabled.
This way Cubase knows that you want to record on this track.
2. Click the Monitor button so that you can hear the instrument playing.
You should now see and hear the incoming audio signal.
Audio coming into this track.