6.0

9
The supported remote control devices
JL Cooper MCS-3000
The MCS-3000 can control 32 mixer channels remotely
(in groups of 8). The following MCS-3000 controls will re-
mote control the following mixer parameter for each chan-
nel strip:
• Fader: volume
• Solo and Mute: solo and mute
• Sel: Select channel for editing
These parameters can be remote controlled for each selected channel
using the dials on the MCS-3000 and switching between Pages 1–4:
• The MCS-3000 bank keys 1–4 are used to select
channels 1–32 in groups of 8.
Bank key 1 selects channels 1–8, bank key 2 selects channels 9–16, etc.
• You can create markers by pressing the “Set Locate”
key on the MCS-3000, typing in a marker ID and pressing
[Return].
• To locate to a marker, press “Locate”, type in a marker
ID and press [Return].
• The MCS-3000 Play, Stop, Record, Rewind and Fast
Forward transport controls will have the equivalent func-
tionality in your application.
Mackie Control
Mackie Control is an automated touch-sensitive control
surface. It is a nine-fader (eight channels and master) MIDI
controller that provides in-depth mixing, editing, automa
-
tion and navigational control for any supported digital au-
dio workstation. A special Lexan overlay that shows all
Steinberg-specific key assignments for the Mackie Con-
trol device is available to customize the controller for your
program.
This is described in a separate chapter, see “Mackie Con-
trol” on page 18.
Mackie HUI
Mackie HUI can control any number of channels in groups
of 8.
• Use the left and right Bank buttons to select channels
1–8, 9–16 etc.
• Use the left and right Channel buttons to shift the fader
assignment in steps of one channel.
• The Fader button in the Auto Enable section is used to
disable/enable the motors.
• The Mute, Pan, Send, Plug In and Send Mute buttons in
the Auto Enable section are currently not supported.
• Use the Rec/Rdy buttons to arm a track for recording.
• Use the Select buttons to select a single track for de-
tailed settings.
• With the Mute and Solo buttons you can mute or solo a
track.
• Use the Default button to un-solo all tracks.
• Use the Assign button to un-mute all tracks.
Page 1 Page 2
Dial Parameter Dial Parameter
1 Pan 1 EQ 1 Gain
2 Effect send 1 2 EQ 1 Freq
3 Effect send 2 3 EQ 1 “Q”
4 Effect send 3 4 EQ 1 Low Limit
5 Effect send 4 5 EQ 1 High Limit
Page 3 Page 4
Dial Parameter Dial Parameter
1 EQ 2 Gain 1 EQ 3 Gain
2 EQ 2 Freq 2 EQ 3 Freq
3 EQ 2 “Q” 3 EQ 3 “Q”
4 EQ 2 Low Limit 4 EQ 3 Low Limit
5 EQ 2 High Limit 5 EQ 3 High Limit
!
The MCS-3000 supports “MIDI Feedback”, allowing
fader settings and channel mute, solo and selection
status to be indicated on the panel. For this to work,
you need a two-way MIDI connection between the
MCS-3000 and the program.