6.0

8
The supported remote control devices
Steinberg Houston
Houston is a MIDI/USB remote control device designed
especially for use with VST audio applications such as
Cubase or Nuendo. With clearly laid out controls (includ-
ing touch sensitive motorized faders, rotary knobs, trans-
port controls and a jog/shuttle wheel) Houston allows you
to control the program, without having to use the com-
puter keyboard or mouse.
• For details about parameters and hands-on mixing tech-
niques, please see the Houston documentation.
The following functions are available:
[Dyn/User1]: Studio Send for selected channel
•Page 01 – Level
•Page 02 – Enable
• Page 03 – Pre/Post
• Page 04 – Pan Left/Right
[User2]: Instrument for selected channel (Instrument
tracks and MIDI track to VSTi from the Rack)
• Page 1 – Select instrument
• Page 2-n – Instrument parameter
Fader Set Section:
• [Shift]+[FX Send1]: Studio Send 1
• [Shift]+[FX Send2]: Studio Send 2
• [Shift]+[FX Send3]: Studio Send 3
• [Shift]+[FX Send4]: Studio Send 4
• Page 1 – Level
• Page 2 – Enable
•Page 3 – Pre/Post
• Page 4 – Pan Left/Right
JL Cooper CS-10
The CS-10 can remote control 32 channels (in groups
of 8). The following CS-10 controls will remote control the
following parameters for each channel strip:
•Fader: volume
• Solo and Mute: solo and mute
• Sel: select channel for editing
The following parameters can be remote controlled for
each selected channel using the six rotary knobs on the
CS-10:
• The CS-10 function keys 1–4 are used to select chan-
nels 1–32 in groups of 8.
Function key 1 selects channels 1–8, function key 2 selects channels 9–
16, and so on.
• If you hold down the function key “Shift” and then move
a fader, the two indicators beside the fader will indicate
whether the fader position is below or above the current
fader level in the program.
If the upper indicator is lit, the fader position on the panel is above the
fader level in the program and vice versa. When both indicators are dark,
the fader positions are matched for that channel.
• The CS-10 Play, Stop, Record, Rewind and Fast For-
ward transport controls control the equivalent functions in
the program.
Dial Parameter
Send 1 Effect send 1
Send 2 Effect send 2
Pan Pan
Boost/cut EQ 1 Gain
Frequency EQ 1 Frequency
Bandwidth EQ 1 Q Factor
!
The CS-10 supports “MIDI Feedback”, allowing the
mute, solo and selection status of channels in your
application to be indicated on the panel. For this (and
the fader position indication described above) to
work, you need a two-way MIDI connection between
the CS-10 and the program.