6.0
Table Of Contents
- Table of Contents
- The supported remote control devices
- Introduction
- Apple Remote (Macintosh only)
- CM Automation Motor Mix
- Steinberg Houston
- JL Cooper CS-10
- JL Cooper MCS-3000
- Mackie Control
- Mackie HUI
- Radikal Technologies SAC-2K
- Roland MCR-8
- Tascam US-428
- Gallery Software ADRStudio (Nuendo only)
- WK-Audio ID (Nuendo only)
- Yamaha 01V
- Yamaha DM2000/DM 2000v2
- Yamaha DM1000v2
- Yamaha 01v96v2
- Yamaha 02r96v2
- Yamaha 01x
- Mackie Control
28
Mackie Control
Fader Set: Pan
Accessing the Pan controls for the current Fader Set is
done by pressing the Pan button in the Assignment sec-
tion.
The left/right panning of a channel in the current Fader Set
is controlled by the corresponding V-Pot.
Global: Send Effects
Mackie Control can control the parameters of the effects
that are loaded in the first insert of FX channels. To access
these effects, press the Sends button in the Action Keys
section.
• When Page 01 is selected, V-Pot 1 selects which ef-
fect of the FX channels is currently being edited (see
“About parameter sub-groups” on page 24).
If no effect is selected for the current slot, the display will
show that ‘No Effect’ is selected.
After a plug-in has been selected in your program, the dis-
play will change to show the currently selected plug-in this
effect slot and the ‘number of pages’ indicator will be up
-
dated to show the amount of pages necessary to display
all the plug-in’s declared parameters.
Here the Reverb32 plug-in has been selected.