6.0

Mackie Control

Selected Channel: Inserts

Accessing the Insert Effect controls for the currently se-

lected channel is done by pressing the Plug-Ins button in

the Assignment section.

Please select a channel by pressing one of the Select but-

tons above the faders.

• When Page 01 is selected, V-Pot 1 selects which of the

insert slots is currently being edited (see “About parame-

ter sub-groups” on page 24).

If no effect is selected for the current insert slot, the dis-

play will show that ‘No Effect’ is selected.

After a plug-in has been selected in your program, the dis-

play will change to show the selected plug-in in this effect

slot and the ‘number of pages’ indicator will be updated to

show the amount of pages necessary to display all the

plug-in’s declared parameters.

Here the Reverb32 plug-in has been selected.

Selected Channel: Studio Sends

Accessing the Studio Sends controls for the currently se-

lected channel is done by pressing the Sends and the

Shift button in the Action Keys section.

Please select a channel by pressing one of the Select but-

tons above the faders.

The controls for the Studio sends are divided into 4

pages:

• Page 1

Send Levels for each of the Studio Sends.

• Page 2

Enable switches for each of the Studio Sends.

• Page 3

Switches to change between pre/post fader mode.

• Page 4

Controls the left/right panning of the Studio send signal.

Selected Channel: Instruments

Accessing the Instrument controls for the currently se-

lected channel is done by pressing the Instruments button

in the Action Keys section.

Please select a channel by pressing one of the Select but-

tons above the faders.