8.0

Preferences
Metering
666
Show File Extensions in Results List
Activate this to display file name extensions in the Results list.
Scan Folders only when MediaBay is open
Activate this to scan Cubase for media files when the MediaBay window is
open. Otherwise, the folders are scanned in the background even when the
MediaBay window is closed.
NOTE
During playing back or recording no folder scans are performed.
Metering
Map Input Bus Metering to Audio Track (in Direct Monitoring)
This allows you to map the input bus metering to monitor-enabled audio
tracks, giving you the opportunity to watch the input levels of your audio tracks
when working in the Project window. For this to work, activate Direct
Monitoring in the Device Setup dialog.
• If this option is activated, audio tracks show the metering signal from the
input bus to which they are routed as soon as the track is
monitor-enabled. Note that the tracks are mirroring the input bus signal,
that is, you will see the same signal in both places. When using mapped
metering, any functions, such as trimming, that you apply to the audio
track are not reflected in its meters.
• If this option is not activated, metering works as usual.
Meters’ Peak Hold Time
This allows you to specify for how long the peak levels are held in the meters.
For this to work, deactivate Meters - Hold Forever in the MixConsole.
Meters’ Fallback
This allows you to specify how quickly the meters in the MixConsole return to
lower values after signal peaks.
Metering - Appearance
On this page you can assign colors to level meter values to quickly identify what
levels are reached. You can adjust the colors for the channel meter or the master
meter. For the master meter you can only make changes for the Digital Scale
scaling mode. Changes take effect when you click Apply or OK.