8.0

Chord Pads
Chord Pad Settings – Remote Control
534
4) MIDI Learn
Activates/Deactivates the MIDI Learn function to assign MIDI input to the Pads
Remote Range and to the parameters Voicings, Tensions, and Transpose.
5) Activate
Activates/Deactivates the remote key assignment for the parameters
Voicings, Tensions, and Transpose. If this is deactivated, only the remote
key assignment for the Pads Remote Range is active.
6) Latch Chords
Activate this if you want the chord pad to play back until it is triggered again.
NOTE
If you use MIDI controllers that are already assigned to other remote control
features, for example, the VST Quick Controls, all previous assignments are lost.
RELATED LINKS
Pads Remote Range on page 534
Pads Remote Range
The Pads Remote Range is the range of remote keys that trigger the chords that
are assigned to the chord pads.
By default, the Range Start is set to C1 and the Range End to B1. This is indicated
by the corresponding keys on the keyboard in the chord pads zone being
highlighted. You can trigger the chords that are assigned to the chord pads by
hitting the keys that correspond to this note range on your MIDI keyboard.
Default Remote Assignment
By default, the MIDI events C1 to B1 trigger the chords that are assigned to the
chord pads. All keys that are not assigned for remote control, by default G#2 and
further, can be used for regular playback.
You can change the voicing, tension or transposition of the triggered chord by
enabling Activate in the lower part of the Remote Control tab and using the
following default remote notes:
Action Description Remote Note
Voicings: Previous Plays back the previous voicing
of the last played chord.
C2