8.0

Remote controlling Cubase
The Remote Control Editor (Cubase Elements only)
399
The following control types are available for knobs:
Standard
A standard knob with undefined LED style.
Toggle Switch
This is best used for parameters with two states, like On/Off buttons.
LED Ring
An LED ring is shown around the knob. The setting increases clockwise.
LED Ring (counter-clockwise)
An LED ring is shown around the knob. The setting increases
counter-clockwise from right to left.
Center Width
The LED ring starts at the top center position and when the settings increase,
an LED is shown growing in both directions.
Center Neutral
The dial starts at the top center position and can be moved left or right, like a
pan control, for example.
Single Dot
As “LED Ring”, but showing only a dot to indicate the current value.
Control Type Settings for Switches
The following options are available for switches:
Momentary
The assigned function is active for as long as you keep the switch pressed.
Increasing Stepwise
Pressing the switch steps through the available settings until the maximum is
reached.
Decreasing Stepwise
Pressing the switch steps through the available settings in reverse order until
the minimum is reached.