8.0

Remote controlling Cubase
The Generic Remote device
395
8. If necessary, make settings for another bank.
NOTE
Note that you only need to make settings in the bottom table for this bank. The table
at the top is already set up according to the MIDI remote device.
If necessary, you can add banks by clicking the Add button below the Bank pop-up
menu.
Clicking the Rename button allows you to assign a new name to the currently
selected bank, and you can remove an unneeded bank by selecting it and clicking the
Delete button.
9. When you are finished, close the Device Setup window.
Now, you can control the specified Cubase parameters from the MIDI remote device.
To select another bank, use the pop-up menu in the Generic Remote window (or use
a control on the MIDI remote device, if you have assigned one for this).
Importing and exporting remote setups
The Export button in the top right corner of the Generic Remote Setup window
allows you to export the current setup, including the Control configuration (the table
at the top) and all banks. The setup is saved as a file (with the file extension “.xml”).
Clicking the Import button allows you to import saved remote setup files.
NOTE
The last imported or exported remote setup will automatically be loaded when the
program starts or the Generic Remote control is added in the Device Setup dialog.
Flags Clicking in this column opens a pop-up menu, allowing you to activate
or deactivate three flags:
• Push Button – When activated, the parameter is only changed if the
received MIDI message shows a value unequal to 0.
• Toggle – When activated, the parameter value is switched between
minimum and maximum value each time a MIDI message is received.
The combination of Push Button and Toggle is useful for remote
controls which do not latch the state of a button. One example is
controlling mute status with a device on which pressing the Mute
button turns it on, and releasing the Mute button turns it off. If Push
Button and Toggle are activated, the Mute status will change between
on and off whenever the button is pressed on the console.
• Not Automated – When activated, the parameter will not be
automated.
Column Description