8.0

Audio Effects
Effect Presets
258
AFTER COMPLETING THIS TASK
You can convert the current program list to VST presets by opening the Preset
Management pop-up menu and selecting Convert Program List to VST Presets.
After converting, the presets will be available in the Presets browser. The converted
presets will be stored in the VST
3 Preset folder.
Saving Insert Presets
You can save the complete insert effect rack for a channel together with all
parameter settings as an inserts preset. Inserts presets can be applied to audio,
instrument, FX channel, or group tracks.
PROCEDURE
1. In the track list, select the track and in the Inspector, open the Inserts section.
2. Load a combination of insert effects and adjust the parameters (or select
effect presets) for each effect.
3. At the top of the Inserts tab, click the Preset Management button to open the
pop-up menu for the inserts and select “Save FX Chain Preset”.
This can also be done from the Channel Settings window using the Preset
Management button at the top of the Inserts section.
4. In the dialog that opens, type in a name for the preset.
5. Select the track (audio/group/instrument/FX channel) to which you want to
apply the new preset.
6. On the Inserts tab, click the Preset Management button and select “Load FX
Chain Preset”.
7. In the dialog that opens, select the preset that you created.
The effects are loaded into the Insert slots of the new track.
NOTE
When loading insert combination presets, any plug-ins that were previously loaded
for the track will be removed, regardless of whether these slots are used in the preset.