8.0

MixConsole
Working with Channel Racks
235
Mix (0 to 100)
Sets the level balance between the dry signal and the wet signal.
Standard Limiter
This channel strip module is designed to ensure that the output level does not
exceed a set output level, to avoid clipping in following devices. Limiter can adjust
and optimize the Release parameter automatically according to the audio material,
or it can be set manually. Limiter also features separate meters for the input, output,
and the amount of limiting (middle meters).
Input (-24 to 24 dB)
Adjusts the input gain.
Output (-24 to 6 dB)
Determines the maximum output level.
Gain Reduction LED
Displays the amount of gain reduction.
Release (0.1 to 1000 ms or Auto mode)
Sets the amount of time it takes for the gain to return to its original level. If
Auto is activated, Limiter automatically finds the best release setting for the
audio material.
Saving/Loading Strip Presets
You can save and load strip presets. Strip presets have the file name extension
.strippreset.
PROCEDURE
• In the top right corner of the Channel Strip rack, open the Presets pop-up
menu and perform one of the following actions:
• To save the current settings as a preset, select Save Strip Preset and name
your preset.
• To load a preset, select Load Strip Preset and select a preset.
NOTE
You can also apply channel strip settings together with insert and EQ settings from
track presets. You can load, tag, and save strip presets in the MediaBay.
Sends
The Sends rack for audio-related channels features send effect slots that allow you
to load send effects and value sliders that allow you to determine the send level for
a channel. For MIDI channels the Sends rack features send effect slots that allow
you to load send effects.