8.0

MixConsole
Working with Channel Racks
234
Drive Amount LED
Indicates the amount of drive of the signal.
Low-Frequency
This is a low shelving filter with fixed frequency.
High-Frequency
This is a Hi Cut filter. Use the frequency fader to reduce harshness.
Limit (Cubase Elements only)
Allows you to avoid clipping even at high levels. Open the pop-up menu to select
between Brickwall Limiter, Maximizer, and Standard Limiter.
Brickwall Limiter
Brickwall Limiter ensures that the output level never exceeds a set limit.
Due to its fast attack time, Brickwall Limiter can reduce even short audio level
peaks without creating audible artifacts. However, this channel strip module creates
a latency of 1
ms. Brickwall Limiter features separate meters for input, output, and
the amount of limiting.
Threshold (-20 to 0 dB)
Determines the level where the limiter kicks in. Only signal levels above the
set threshold are processed.
Release (ms)
Sets the time after which the gain returns to the original level when the signal
drops below the threshold. If Auto is activated, Brickwall Limiter
automatically finds the best release setting for the audio material.
Gain Reduction LED
Displays the amount of gain reduction.
Maximizer
This channel strip module raises the loudness of audio material without the risk of
clipping.
Optimize
Determines the loudness of the signal.
Output (-24 to 6 dB)
Determines the maximum output level. Set this to 0 dB to avoid clipping.
Gain Reduction LED
Displays the amount of gain reduction.