8.0

MixConsole
Working with Channel Racks
231
Output (-12.0 to 12.0 dB)
Sets the output gain.
Gain Reduction LED
Indicates the amount of compression of the signal.
Attack (0.1 to 100.0 ms)
Determines how fast the compressor responds. If the attack time is long, more
of the initial part of the signal passes through unprocessed.
Release (10 to 1000 ms or Auto mode)
Sets the time after which the gain returns to the original level. If Auto is
activated, Tube Compressor automatically finds the best release setting for
the audio material.
Drive (1.0 to 6.0)
Controls the amount of tube saturation.
Mix (0 to 100)
Sets the level balance between the dry signal and the wet signal.
VintageCompressor (Cubase Elements only)
VintageCompressor is modeled after vintage type compressors.
Input (-24 to 48 dB)
In combination with the Output setting, this parameter determines the
compression amount. The higher the input gain setting and the lower the
output gain setting, the more compression is applied.
Output (-48 to 24 dB)
Sets the output gain.
Gain Reduction LED
Indicates the amount of compression of the signal.
Attack (0.1 to 100 ms)
Determines how fast the compressor responds. If the attack time is long, more
of the early part of the signal passes through unprocessed.
Punch (On/Off)
If this is activated, the early attack phase of the signal is preserved, retaining
the original punch in the audio material, even with short Attack settings.
Release (10 to 1000 ms or Auto mode)
Sets the time after which the gain returns to its original level. If Auto is
activated, Vintage Compressor automatically finds the best release setting
for the audio material.