8.0

MixConsole
Working with Channel Racks
229
EQ
Allows you to make EQ settings.
Tools (Cubase Elements only)
Provides various tools.
Sat (Cubase Elements only)
Allows you to add warmth to the sound.
Limit (Cubase Elements only)
Allows you to avoid clipping even at high levels.
Noise Gate (Cubase Elements only)
Noise gating silences audio signals below a set threshold. As soon as the signal
level exceeds the threshold, the gate opens to let the signal through.
Threshold (-60 to 0 dB)
Determines the level at
which Gate is activated. Signal levels above the set
threshold trigger the gate to open, and signal levels below the set threshold
close the gate.
Release (10 to 1000 ms or Auto mode)
Sets the time after which the gate closes (after the set Hold tim
e). If Auto
Release is activated, Gate automatically finds the best release setting for the
audio material.
State LED
Indicates whether the gate is open (LED lights up in green), closed (LED
lights up in red),
or in an intermediate state (LED lights up in yellow).
Attack (0.1 to 1000 ms)
Sets the time after which the gate opens when it is triggered.
Range
Adjusts the attenuation of the gate when it is shut. If Ra
nge is set to , the
gate is completely shut. The higher the value, the higher the level of the signal
that passes
through the shut gate.
Filter Frequency (50 to 20000 Hz)
If Si
de-Chain is activated, this sets the filter frequency.
Q-Factor (0.01 to 10000)
If Si
de-Chain is activated, this sets the resonance of the filter.
Listen Filter
Allows you to monitor the filtered signal.