8.0

MixConsole
Copying and Moving Rack and Channel Settings
216
Clipping
Clipping typically occurs in the audio hardware when an analog signal is too loud
and therefore converted to digital in the hardware’s A/D converters.
Copying and Moving Rack and Channel Settings
You can use drag and drop to copy or move rack and channel settings.
Drag and drop works between different channels or different rack slots on the same
channel. When you drag, a blue frame indicates the sections where you can drop
your settings.
The following applies:
• To copy the rack settings from one rack to another, drag the rack and drop it
on the rack to which you want to copy the settings.
• To move the rack settings from one rack to another, press [Alt]/[Option], drag
the rack, and drop it on the rack to which you want to move the settings.
• To copy the channel settings from one channel to another, drag the channel
and drop it on the channel to which you want to copy the settings.
You can copy rack and channel settings between different types of channels,
provided that the target channels have corresponding settings.
• For example, copying from input/output channels leaves the sends settings in
the target channel unaffected.