8.0

VST Connections
Adding Input and Output Busses
20
4. Activate/Deactivate ports.
5. Click OK.
Adding Input and Output Busses
PROCEDURE
1. In the VST Connections dialog, click the Inputs or Outputs tab.
2. Click Add Bus.
The Add Input Bus dialog opens.
3. Configure the bus.
4. Optional: Enter a name for the bus.
If you do not specify a name, the bus is named according to the channel configuration.
5. Click Add Bus.
The new bus is added to the bus list.
6. For each of the speaker channels in the bus, click in the Device Port column
and select a port of your audio hardware.
Setting the Default Output Bus (Main Mix)
The Main Mix is the default output bus to which each new audio, group, or FX
channel is automatically routed. If only one bus is available, this bus is automatically
used as the default output bus.
PREREQUISITE
Add an output bus.
PROCEDURE
1. In the VST Connections dialog, right-click the output bus that you want to
use as default output bus.
2. Select Set as Main Mix.
RESULT
The selected bus is used as default bus. The Main Mix is indicated by a speaker
icon next to its name.