8.0

Markers
Cycle Markers
197
Setting the Locators Using Cycle Markers
Cycle markers represent ranges in your project. You can use them for moving the
left and right locators.
PROCEDURE
• To set the left locator to the cycle marker start and the right locator to the
cycle marker end, perform one of the following actions:
• Double-click on a cycle marker.
• From the Cycle pop-up menu in the track list, select a cycle marker.
RESULT
The left and right locators are moved to encompass the cycle marker.
AFTER COMPLETING THIS TASK
Now you can move the project cursor position to the start or the end of the cycle
marker by moving it to the corresponding locator or use cycle markers to export
specific ranges of your project with the Export Audio Mixdown dialog.
Editing Cycle Markers
When editing cycle markers on the marker track, snap is taken into account.
• To add a cycle marker, press [Ctrl]/[Command] click and drag on the marker
track.
• To change the start/end position of a cycle marker, drag the start/end handle.
• To move a cycle marker to another position, drag the upper border.
• To delete a cycle marker, click with the Erase tool.
If you hold down [Alt]/[Option] when you click, all consecutive markers are
deleted.
• To trim a cycle marker, select a range in the cycle marker and press
[Ctrl]/[Command]-[X].
• To set the marker start/end of the selected cycle marker to the cursor position,
select Project > Markers to open the Markers window, and select
Functions > Set marker start/end to cursor.
• To create a selection range spanning all tracks in the project, double-click a
cycle marker.
• To set the left and right locators, double-click a cycle marker.
• To zoom in on a cycle marker, press [Alt]/[Option] and double-click the cycle
marker.