8.0

Arranger Track (Cubase Elements only)
Live mode
192
Live mode
If you have set up an arranger track and play it back, you have also the possibility to
influence the playback order “live”. Note that the Arranger mode has to be activated
to be able to use the Live mode.
PROCEDURE
1. Set up an arranger chain in the Inspector or in the Arranger Editor for an
arranger track, activate the Arranger mode and play back your project.
Now you can use your arranger events listed in the lower section of the Inspector to
play back your project in Live mode.
2. Switch into Live mode by clicking on the little arrow in the lower list of the
Inspector to the left of the arranger event you want to trigger.
The arranger event will be looped endlessly, until you click on another arranger event.
This might be useful, for example, if you want to loop a guitar solo with a flexible
length.
In the Jump Mode pop-up menu, you can define how long the active arranger event
will be played, before jumping to the next one.
• You can stop Live mode by clicking the Stop button or go back to “normal”
playback in Arranger mode by clicking on any arranger event in the upper list.
In the latter case, playback will be continued from the arranger event where you
clicked.
RELATED LINKS
Jump Mode options on page 193